Fabhind
Fabhind
GIDC Vatwa, Ahmedabad, Gujarat
GST No. 24AABFF4331Q1ZD
TrustSEAL Verified
Call 0804860401278% Response Rate
SEND EMAIL

Tyre Cutting Machine

Pioneers in the industry, we offer 120-150 tyres/hour hydraulic truck tyre side wall cutting machine, 60-70 tyres/hour truck & bus tyre side wall cutting machine, 5 hp, 9-10 tons car & jeep tyre side wall cutting machine, 10 hp and 60-80 wires/hour heavy duty truck tyre debeader machine, 15 hp from India.

120-150 Tyres/Hour Hydraulic Truck Tyre Side Wall Cutting Machine

120-150 Tyres/Hour Hydraulic Truck Tyre Side Wall Cutting Machine
  • 120-150 Tyres/Hour Hydraulic Truck Tyre Side Wall Cutting Machine
  • 120-150 Tyres/Hour Hydraulic Truck Tyre Side Wall Cutting Machine
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Production Capacity120-150 Tyres/hour
Feed Tyre Size9.00-20 to 12.00-20
Phase3 Phase
Voltage440 V
ConditionNew
Country of OriginMade in India

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.


Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.


The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.


Features:
  • Cut the truck tyre in three pieces
  • Feeding of the reactor will increase up to the capacity
  • Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
  • Increase profit by decreasing production costing
  • Easy to install
  • Less maintenance require
Request
Callback
Yes! I am Interested

60-70 Tyres/Hour Truck & Bus Tyre Side Wall Cutting Machine, 5 HP

60-70 Tyres/Hour Truck & Bus Tyre Side Wall Cutting Machine, 5 HP
  • 60-70 Tyres/Hour Truck & Bus Tyre Side Wall Cutting Machine, 5 HP
  • 60-70 Tyres/Hour Truck & Bus Tyre Side Wall Cutting Machine, 5 HP
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Production Capacity60-70 Tyres/hour
Feed Tyre Size16" to 22"
Motor Power5 HP
Phase3 Phase
Voltage230 V
ConditionNew
Country of OriginMade in India

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.


Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.


The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.


Features:
  • Cut the truck tyre in three pieces
  • Feeding of the reactor will increase up to the capacity
  • Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
  • Increase profit by decreasing production costing
  • Easy to install
  • Less maintenance require
Request
Callback
Yes! I am Interested

9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP

9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
  • 9-10 Tons Car & Jeep Tyre Side Wall Cutting Machine, 10 HP
Get Best Quote
Approx. Price: Rs 4.25 Lakh / PieceGet Latest Price
Product Brochure

Product Details:

Production Capacity9-10 Tons
Feed Tyre Size9.00-20 to 12.00-20
Motor Power10 HP
Phase3 Phase
Voltage440 V
ConditionNew
Country of OriginMade in India

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.


Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.

The Sidewall Cutter machine picks up whole tyres, cuts the sidewalls using a tool steel grade cutting blade, and drops the cut tyre back on the ground. Two sidewalls and one tread portion are left after this operation.

The main advantage of cutting the tyre sidewalls is that it allows for additional tyre processing: with the rubber bead properly isolated, shredding becomes considerably easier. This is due to the presence of a thick steel belt in the bead section, which causes excessive wear on most shredders. The tread piece can be easily shredded once the sidewall has been removed.


Features:
  • Cut the truck tyre in three pieces
  • Feeding of the reactor will increase up to the capacity
  • Reduce purchase cost of tyre by purchasing whole tyre in bulk quantity(auction)
  • Increase profit by decreasing production costing
  • Easy to install
  • Less maintenance require
  • Capacity: 9 to 10 Tons of Truck Tyres (1020mm Or 1040mm) in a one shift (10 Hrs.)
Request
Callback
Yes! I am Interested

60-80 Wires/Hour Heavy Duty Truck Tyre Debeader Machine, 15 HP

60-80 Wires/Hour Heavy Duty Truck Tyre Debeader Machine, 15 HP
  • 60-80 Wires/Hour Heavy Duty Truck Tyre Debeader Machine, 15 HP
  • 60-80 Wires/Hour Heavy Duty Truck Tyre Debeader Machine, 15 HP
Ask For Price
Product Price :Get Latest Price
Product Brochure

Product Details:

Production Capacity60-80 Wires/hour
Feed Tyre Size7.50-16 to 10.00-20
Motor Power15 HP
Phase3 Phase
Voltage230 V
ConditionNew
Country of OriginMade in India

Cutting a variety of rubber blocks and rubber strips is possible using waste tyre cutting machines. It works well with oblique rubber tyres, steel wire tyres, rubber strips, and other rubber materials. In tyre pyrolysis plants, the tyre cutter is also employed as a pre-treatment device, which may considerably improve pyrolysis efficiency. In the production of tyre recycling plants, rubber recycling plants, and rubber powder manufacturing lines, tyre cutting equipment is also an important stage. It is a necessary component in the production of rubber powder or granules.


Tire cutting machines are specialised machines that are used to cut huge steel tyres, fibre tyres, and other waste tyres once the sidewall steel ring has been removed. The tyre cutter machine can cut a variety of discarded tyres into rubber blocks with the needed requirements, making crushing of follow-up equipment much easier.


Features:
  • Feeding Of The Reactor Will Increase Up to the Capacity
  • Reduce Purchase Cost of Tyre By Purchasing Whole Tyre in Bulk Quantity(Auction)
  • Increase Profit By Decreasing Production Costing
  • Easy To Install
Request
Callback
Yes! I am Interested
X

Product Videos

Watch More Videos

Explore More Product

View All Product


Reach Us
Riteshbhai Prajapati (General Marketing Manager)
Fabhind
No. 16, Khodiyar Estate, Phase 4
GIDC Vatwa, Ahmedabad - 382445, Gujarat, India


Call Us


Send E-mail